Butterflies & Pineapple Lace Beanie
The Fall Fashion Series
The story of the Butterflies & Pineapple Lace Beanie or Skull Cap goes something like this… Once upon a time, I stumbled upon some gorgeous sock weight yarn by Deborah Norville - Serenity Sock Weight in Pink Sugar color. It is a blend and slow variegation yarn between shades of pink to deep rose with purple tint and I fell in love.
I didn’t know what would come of the yarn, but I did know it was going to be something I would love and cherish for ages to come, and you would, too. This was actually the first pineapple lace pattern that was written and tested in June awaiting its debut… and it’s finally HERE!
Disclaimer: This post contains affiliate links
Come share your WIP or FO, we’d love to see them! — Connect with Loungers at …
♥ 



♥
Don’t hesitate to visit me on Facebook if you have any pattern specific or crochet related questions! The Loungers are fabulously helpful even if I may not have all the answers ♥ With that said, don’t forget to check your gauge and adjust hook sizes until you find one to match the stated gauge!
Materials
-
100yds (0.8oz) Sock Yarn (3ply for those downunder) - Sample in photo made in Deborah Norville Serenity Sock Yarn
- H-8 (5mm) for the brim, I-9 (5.5mm) Hook for the beanie or Hook Size to Obtain Gauge
- Tapestry Needle
- Scissors/Yarn Cutter
Sizing
Hook & FO Sizing
~21-22″ circumference adult size - H/8 (5.0mm) & I/9 (5.5mm) hook
Stitches (sts) & Abbreviations
Magic Circle The Crochet Lounge Way - wrap yarn around finger twice clockwise onto your finger on the left hand (counter-clockwise on the right-hand for the lefties), insert hook into the center of the circle, yo draw up a loop ch1 tightly to close.
Yarn over (yo) – wrap yarn over hook
Chain (ch) – yo, pull through loop on hook
Foundation single crochet (fsc) – ch2, insert hook into 2nd chain from hook, yo draw up a loop, yo draw through 1 (this creates the next foundation chain), yo draw through 2 (this completes the single crochet) *insert hook into the foundation chain just created, yo draw up a loop, yo draw through 1, yo draw through 2 Repeat from * until total fsc completed
Slip Stitch (slst) - insert hook in indicated stitch, yo draw through stitch and loop on hook
Single crochet (sc) - insert hook in indicated stitch, yo draw up a loop, yo draw through 2
Half double crochet (hdc) - yo, insert hook in indicated stitch, yo draw up a loop, yo draw through all 3 loops on hook
Special Stitches Defined:
3dc Shell - 3dc in indicated stitch
V-Shell – (2dc, ch1, 2dc) in indicated stitch
5dc-Fan – 5dc in indicated stitch
5dc-Fan in V-Shell – 5dc in ch1 spc of indicated V-Shell
6dc-Fan – 6dc in indicated stitch
6dc-Fan in V-Shell – 6dc in ch1 spc of indicated V-Shell
V-Shell in V-Shell - V-Shell in ch1 spc of indicated V-Shell
6dc-Fan in 5dc-Fan - 6dc-Fan in center dc of 5dc-Fan of previous round
Invisible sc Join The Crochet Lounge™ Way – in the last stitch of the round, insert hook into the last stitch, draw up a loop, insert hook into the back loop only (blo) of the first stitch in the round, yo, draw up and through the loops on hook, leave a 6” tail, cut the yarn. Insert hook through both loops of the second stitch of the round, yo with tail draw yarn through. Insert hook into the front loop only (flo) of the last stitch of the round, draw tail through. From wrong side of piece, insert hook through the same last stitch in the round under both loops, draw tail to the inside and fasten off
Gauge
2” (5.08cm) after first 2 rounds - adjust hook size to obtain gauge
If your gauge is not matching the above within the first 2 to 3 rounds, it’s time to adjust - although mentioned before in the Pineapple Lace Sunhat that it is crucial in hat-making that your gauge matches in the increase rounds or your hat will end up being way too big or way too small, it is LESS critical on a hat made with sock yarn or highly stretchable material vs. 100% cotton.
If your stitching is resulting in a larger round height, you need to adjust your golden loop or drop down in hook size and use the hook that obtains gauge.Golden Loop - after inserting your hook into an indicated stitch, the Golden Loop is the loop you yarn over and draw up. The height of your row/round depends on how high you draw up the Golden Loop. This matters greatly in gauge matching if you are needing to follow hook size and or have already dropped down in hook size and cannot obtain gauge.
Pattern
<Note: Beginning ch2 of each round does not count as a stitch throughout this pattern and can be replaced by using beginning standing dc, effectively eliminating the need for ch2 start>
Magic Circle The Crochet Lounge Way (Click for Righty Tutorial, Lefty Tutorial)
Round 1
12dc into the Magic Circle
[12dc]
Round 2
Ch2, 2dc in each dc around, slst join to the first dc of the round
[24dc]
Round 3
Ch2, 3dc in same st, skp next dc,
*3dc in next dc, skp next dc,
Rpt from * 10 times,
Slst join to the first dc of the round
[36dc or 12 3dc-shell]
Round 4
Slst in next st ,
Ch2, V-Shell in same spc
*V-Shell in center of next 3dc-shell,
Rpt from * 10 times,
Slst join to the first dc of the round
[12ch1 spc + 48dc or 12 V-Shell]
<Note: You are now working in the center of the 3dc-shell in this round>
Round 5
Slst in next 2 st (to ch1 spc of V-shell),
Ch2, 5dc in same spc,
*5dc-fan in next V-Shell,
Rpt from * 10 times,
Slst join to the first dc of the round
[12 5dc-fan or 60dc]
<Note: You are working in the ch1 spc of the V-Shells this round>
Round 6
Slst in next 2 st (to center of 5dc-fan),
Ch2, 6dc-fan in same dc
*6dc-fan in next 5dc-fan of Round 5,
Rpt from * 10 times,
Slst join to the first dc of the round
[12 6dc-fan or 72dc]
<Note: You are working in the center st of the 5dc-fan>
Round 7
Ch2, dc in each dc around, slst join to the first dc of the round
[72dc]
<Note: This is where the Pineapple Lace starts - Pattern works over 24 stitches, so you won’t see repeats for a bit - rest assured
While working with Pineapple Lace, the ch2 spc before and after a V-Shell will always be skipped and not crocheted into other than for the brim.>
Round 8
Ch2, V-Shell in same spc,
Ch2, skp 3dc, dc in next dc,
Ch2, skp 3dc, V-Shell in next dc,
Ch2, skp 3dc, (sc in next dc, ch5, skp next dc) 4 times, sc in next dc,
Ch2,
*Skp 3dc, V-Shell in the next dc,
Ch2, skp 3dc, dc in next dc,
Ch2, skp 3dc, V-Shell in next dc,
Ch2, skp 3dc, (sc in next dc, ch5, skp next dc) 4 times, sc in next dc,
Ch2,
Rpt from *,
Slst join to the first dc of the round
[Total 3 sets repeated]
Round 9
Slst in next 2 st (to ch1 spc of V-Shell),
Ch2, V-Shell in same spc,
Ch2, 3dc in next dc,
Ch2, V-Shell in V-Shell,
Ch2, (sc in next ch5 spc, ch5) 3 times, sc in next ch5 spc,
Ch2, *V-Shell in V-Shell,
Ch2, 3dc in next dc,
Ch2, V-Shell in V-Shell,
Ch2, (sc in next ch5 spc, ch5) 3 times, sc in next ch5 spc,
Ch2,
Rpt from *,
Slst join to the first dc of the round
[Total 3 sets repeated]
Round 10
Slst in next 2 st (to ch1 spc of V-Shell),
Ch2, V-Shell in same spc,
Ch2, (2dc in next dc) 3 times,
Ch2, V-Shell in V-Shell,
Ch2, (sc in next ch5 spc, ch5) 2 times, sc in next ch5 spc,
Ch2, *V-Shell in V-Shell,
Ch2, (2dc in next dc) 3 times,
Ch2, V-Shell in V-Shell,
Ch2, (sc in next ch5 spc, ch5) 2 times, sc in next ch5 spc,
Ch2,
Rpt from *,
Slst join to the first dc of the round
Round 11
Slst in next 2 st (to ch1 spc of V-Shell),
Ch2, V-Shell in same spc,
Ch2, (dc in next dc, ch1) 5 times, dc in next dc,
Ch2, V-Shell in V-Shell,
Ch2, sc in next ch5 spc, ch5, sc in next ch5 spc,
Ch2,
*V-Shell in V-Shell,
Ch2, (dc in next dc, ch1) 5 times, dc in next dc,
Ch2, V-Shell in V-Shell,
Ch2, sc in next ch5 spc, ch5, sc in next ch5 spc,
Ch2,
Rpt from *,
Slst join to the first dc of the round
<Note: From here, the pattern just shifts over 12 stitches, so you will start to recognize the repetition from Round 8 in Round 12>
Round 12
Slst in next 2 st (to ch1 spc of V-Shell),
Ch2, V-Shell in same spc,
Ch2, (sc in next ch1 spc, ch5) 4 times, sc in next ch1 spc,
Ch2, V-Shell in V-Shell,
Ch2, dc in next ch5 spc,
Ch2, *V-Shell in V-Shell,
Ch2, (sc in next ch1 spc, ch5) 4 times, sc in next ch1 spc,
Ch2, V-Shell in V-Shell,
Ch2, dc in next ch5 spc,
Ch2,
Rpt from *,
Slst join to the first dc of the round
Round 13
Slst in next 2 st (to ch1 spc of V-Shell),
Ch2, V-Shell in same V-Shell,
Ch2, (sc in next ch5 spc, ch5) 3 times, sc in next ch5 spc,
Ch2, V-Shell in V-Shell,
Ch2, 3dc in next dc,
Ch2,
*V-Shell in V-Shell,
Ch2, (sc in next ch5 spc, ch5) 3 times, sc in next ch5 spc,
Ch2, V-Shell in V-Shell,
Ch2, 3dc in next dc,
Ch2,
Rpt from *,
Slst join to the first dc of the round
Round 14
Slst in next 2 st (to ch1 spc of V-Shell),
Ch2, V-Shell in same spc,
Ch2, (sc in next ch5 spc, ch5) 2 times, sc in next ch5 spc,
Ch2, V-Shell in V-Shell,
Ch2, (2dc in next dc) 3 times,
Ch2,
*V-Shell in V-Shell,
Ch2, (sc in next ch5 spc, ch5) 2 times, sc in next ch5 spc,
Ch2, V-Shell in V-Shell,
Ch2, (2dc in next dc) 3 times,
Ch2,
Rpt from *,
Slst join to the first dc of the round
Round 15
Slst in next 2 st (to ch1 spc of V-Shell),
Ch2, V-Shell in same spc,
Ch2, sc in next ch5 spc, ch5, sc in next ch5 spc,
Ch2, V-Shell in V-Shell,
Ch2, (dc in next dc, ch1) 5 times, dc in next dc,
Ch2,
*V-Shell in V-Shell,
Ch2, sc in next ch5 spc, ch5, sc in next ch5 spc,
Ch2, V-Shell in V-Shell,
Ch2, (dc in next dc, ch1) 5 times, dc in next dc,
Ch2,
Rpt from *,
Slst join to the first dc of the round
Round 16
Slst in next 2 st (to ch1 spc of V-Shell),
Ch2, V-Shell in same spc,
Ch2, dc in ch5 spc,
Ch2, V-Shell in V-Shell,
Ch2, (sc, ch5 in next ch1 spc) 4 times, sc in next ch1 spc,
Ch2,
*V-Shell in V-Shell,
Ch2, dc in ch5 spc,
Ch2, V-Shell in V-Shell,
Ch2, (sc, ch5 in next ch1 spc) 4 times, sc in next ch1 spc,
Ch2,
Rpt from *,
Slst join to the first dc of the round
Round 17
Slst in next 2 st (to ch1 spc of V-Shell),
Ch2, V-Shell in same spc,
Ch2, 3dc in next dc,
Ch2, V-Shell in V-Shell,
Ch2, (sc, ch3 in next ch5 spc) 3 times, sc in next ch5 spc,
Ch2,
*V-Shell in V-Shell,
Ch2, 3dc in next dc,
Ch2, V-Shell in V-Shell,
Ch2, (sc, ch3 in next ch5 spc) 3 times, sc in next ch5 spc,
Ch2,
Rpt from *,
Slst join to the first dc of the round
Brim - Beanie/Skull Cap Style
Depending on your head size, switch to H/8 (5mm) hook here if needed
Round 18
Ch1, sc in same st, sc in each st around
<Note: In the brim rounds, you will make an sc in each st around. For example: sc in each sc, sc in each dc, sc in each ch1 spc, 2sc in each ch2 spc, and 3sc in each ch3 spc> [104 sc]
Round 19
Ch1, sc in each st around, sl st join to the first sc of the round
[104 sc]
Round 20
Ch1, sc in first st and the next 102 st around, on the last sc use invisible sc join The Crochet Lounge Way to finish your brim
Weave in Ends
Did you have fun? I had a blast with this one that I know for sure I will be making more in the near future. Would you like to see more lace hats? Connect with Me - I look forward to hearing from the Loungers ♥ The Crochet Lounge Fan Page on facebook or The Crochet Lounge G+





Always remember and never forget, you can always connect with me to show me what wonderful things you are hooking, ask me questions or simply come and say hello!














